Mistakes To Avoid While Doing Irrigation Installation in Leander

Doing an irrigation installation Leander is a wise investment of time and money as you can enjoy the many benefits of living here. When setting up or upgrading a commercial or home irrigation system, there are a few things that can go wrong. DIY is not recommended if you want a quality system. Thus, many businesses, homeowners, and gardeners have turned to automatic irrigation to keep their flowers, plants, and grass watered. 

Professional sprinkler services in Leander can make installing an irrigation system quite easy and affordable. However, even with them, there are a few things that can go potentially wrong. Let us see what they are. 

• Digging without checking 

Not checking for electrical cables or gas pipes before digging into the ground can be quite dangerous. It is because you can hit an electrical cable and get electrocuted if you hit a gas pipe or possibly charge the entire sprinkler system. In case you hit a gas pipe, you might also start a fire. Therefore you should always check for the location of electrical cables or gas pipes in your yard before you dig the sprinkler pipe trench. 

• Depth of pipe trenches

Putting the pipe trench either too shallow or too deep is a big mistake most people commit. Pipe trenches for an inground sprinkler system must be at least 7 inches underground and not more than 10 inches. In case the pipe is less than 7 inches underground, the PVC pipe becomes susceptible to the weight of anything about the ground and can develop cracks. And if the pipe is deeper than inches, it might become challenging to tell if it is cracked or broken. Moreover, it will take some amount of work to take them up. 

• Watering grass and beds together

Oftentimes, people take a shortcut to set up the irrigation system to water shrubs and planters together with grass. This can pose a major problem. Shrubs, trees, and groundcovers have extensive root systems compared to grass, so they only require about half the water. Therefore plant as, and shrubs require watering separately from grass. 

• Incomplete coverage of irrigation head zones

Each irrigation head has a maximum distance it can reach, so you must accurately measure and do the irrigation installation in Leander to have full coverage. 

• Heads running the same amount of time

As different sprinkler heads exhibit different precipitation rates, you should not set all of them to run for the same amount of time. If more water comes out of the head, the zone can run for a shorter time. And, if less water comes out of the head, the zone must run for a long time. 

• Overspray

Over spraying implies that the sprinkler head sprays water outside the landscape area, such as sidewalks, neighbor’s property, or onto driveways. It can often result in wasting water to fill an average hot tub. By eliminating or reducing the overspray, you can conserve water and money. 

These are some common mistakes people commit while installing irrigation in Leander. 

Conclusion 

When there is an installation of a sprinkler system, there are many moving variables in parts. Therefore, it is always ideal to hire a professional sprinkler service in Leander that does this work daily and knows all the ins and outs. Bringing in a professional company will help you guide, so you don’t waste valuable time and money getting the lawn you want.