Landlord’s Electrical Certificates
Landlord’s Electrical Certificates for landlords are mandatory to let. Property is known to be habitually defective. Or likely to cause injury or damage to a person or persons. All prospective tenants will need to obtain an electrical installation certificate. Before allowing into the premises. Most people general idea of the steps involved in obtaining one. What they don’t realize is the exact procedure involve. This article intends to provide landlords with a quick guide. How to get your new electrical installation certificate.
Landlord’s Electrical Certificates who let their properties for rent must also obtain a consumer unit assessment from an approved body. This assessment will cover how your property is suitable for its intended use. An example of a covered area. How does your property fit with electrical equipment? Including gas appliances. The consumer unit assessment will also look at the current safety standards for electricity on your property. And any other requirements your landlord may have. Landlords’ Electrical Certificates are required by law to carry out a fresh roof or boiler inspection on their property each year.
They provide their tenants with a copy of this certificate upon their arrival on the property
Some properties won’t have it as standard although as a landlord you must insist that it is provided and not be left out. Tenants can request a copy of the certificate from the landlord and if they don’t they may consider taking legal action against you.
It is not a legal requirement for landlords to carry out electrical testing as part of their inspection process. It is however a requirement that they do carry out all checks and seek professional advice from trusted bodies when needed. All landlords should undertake remedial works to make their properties safer and more suitable for their tenants 786electricals.
The First Thing Landlords Should Do Is Carry Out A Thorough Inspection of Their Property
They should then make sure that all the potential points of failure are identified. The next step is to identify any areas of concern. For example, some potential problems could include faulty electrical installation, poor ventilation, leaking faucets, loose or missing pipes, and other faults. Any of these problems could present a serious risk to your tenants and therefore you should rectify them as soon as possible Emergency electricians.
If You Don’t Carry Out Any Electrical Checks
Your property may still be at risk from electrical faults. The next step is to get your property inspected by an independent electrical contractor who is familiar with your type of property and its security risks. They should carry out a thorough inspection and give you the results. They will then write up a report detailing their findings. Your landlord safety certificate should contain details of the electrician’s report and the problems detailed within it more visit.
It is Important to Remember That Your Current Safety Standards Are Set For an ‘Average’ Building
You may have particular issues specific to your property that you need to check and make sure your landlord certificates take this into account. For example, if you have a gas leakage in one or more points of water entry then your certificate may state that your property is at risk of gas leakage. Your gas certificate may not take this into account. Because of the present safety standards for properties with water entry. Set at a higher standard than average.
When Landlords Carry Out a Check for Their Property
They should identify all potential risks to your property and carry out the necessary research to identify potential weak spots. Electricians also offer specialist eicr training which can greatly help with this work. A reputable and reliable electrician will always complete the appropriate paperwork relating to your property and the obtaining of your landlord electrical safety certificate as required by law.
