DIY Tablecloth

DIY Tablecloth. Although a party table does not need any help in terms of popularity, it is much nicer to make a big deal with these things. Whether you’re making a selection of expert ice cream treats, a pimp station from your prosecco, or spoiling a well-meaning trip to M&S, it’s always going to look like the store on a nicely painted DIY tablecloth. This project is also ideal for upcycling: to hem an old sheet or tablecloth of the right size so you can brush the larger terrazzo grains strategically over any marks or stains on the fabric. Better than new. This is a handy DIY New Year’s party decoration that looks great but also protects your table from spillage. All you need now is a photo booth background and some matching barley. We also know that this DIY tablecloth will give you the patio bug, so go to our DIY patio benches when you’re done! Then you can also look at our pencil sketches.

You will need:

• Simple tablecloth or sheet
• Matching sewing thread
• YUPO card
• Craft knife
• Cutting mat
• Cloth scissors
• Brush
• Color palette
• Yellow, pink, purple, green, and blue acrylic paints
• Textile medium
• DK yellow yarn
• Map

Instructions for making the tablecloths yourself

You will need

• Tablecloth
• Wire
• YUPO card
• Craft knife
• Cutting mat
• Cloth scissors
• Brush
• Color palette
• Acrylic paint
• Map

Total time:

One day

Step 1

If you are using a larger sheet or tablecloth for the project, make sure to hem the edges to fit the intended table. If not, start with step 3. For the hem, trim the cloth to the correct size for the table, then fold the edges about 2 cm (3/4 inch) on the wrong side—pin along each folded edge as shown.

Step 2

Use a sewing machine and matching thread to sew along the pinned edges. Use a 1.5 cm (5/8 “) seam allowance and remove the pins as you go. (If you are new to sewing.

Step 3

How to make the stencil:

• Use the Mollie Make 107 patterns to cut out the different shapes of the patio.
• Arrange the cut shapes on YUPO paper or a thick piece of cardboard, making sure the conditions are evenly spaced.
• Draw around each with a pencil.

Step 4

Trim out the figures with a craft cutter and cutting mat. Although YUPO paper is quite hard, you need to be careful not to tear it when you miss it, as this will affect the stencil.

Step 5

Mix the first color with the acrylic paint or mix several colors to get the desired shade. When you are satisfied with the paint, add the textile support. Add one piece of medium material to one amount of paint and mix thoroughly, stirring for about 30 seconds to make sure they mix entirely.

Step 6

Spread the tablecloth on a flat surface – you may want to put newspapers underneath to protect the surface. Place the stencil on the tablecloth and use a brush to paint the first color through one of the shapes. Paint from the outside so that the paint does not get under the stencil’s edge and do not use too much paint at once. Once the first mold is filled, move the stencil to another location and repaint the mold. Repeat this process until the first shape is evenly distributed over the DIY tablecloth.

Step 7

Repeat strolls 5 and 6 for each of the other colors, shifting the stencil and painting until the tablecloth is covered. Use the main picture as a guideline.

Step 8

Let the tablecloth dry for 24 hours before putting the color in the heat. This is unnecessary, but if it is not heat-solidified, the paint will peel off when the tablecloth is washed. To reheat, just iron over medium heat without steam – this will ruin the color – focus on one area at a time. Press each painted area for about three to five minutes to ensure it is completely glued to the fabric.

Step 9

For decorative tassels, wrap the wire around an approximately 20 cm long piece of cardboard. Continue wrapping until you have enough yarn for the desired thickness of the tassel. The more wool you cover, the thicker the finished tassel will be.

Step 10

Cut along one side of the bundle as shown and hold the opposite side to hold the strands of yarn in place. This creates a pile of folded wire on one side and loosens on the other side.

Step 11

Cut another string length and wrap it around the bundle about 3/4 “(2 cm) from the folded end. Tie it to hold the pile in place, then let the ends hang with the other threads.

Step 12

Sew the finished tassel in one intersection of the tablecloth. Repetition steps 9-12 three more additional times to add a brush to each corner of the DIY tablecloth. Cut off the points to complete.

Also read: 5 Pro Tips for Getting into a Gallery